In the printing industry, there are many types of laminating/mounting processes. Do you know what they are?
1. Single-Sided Gray Board Mounting
Structure: One printed piece (face paper) + one gray board (mounting material). This is the most common type found in quick printing shops and simple packaging.
(1) Materials:
Face Paper: Commonly coated paper, matte paper, art paper, specialty paper, etc. (157g, 200g, 250g, 300g, or even thicker). Mostly single-sided printing.
Gray Board: Single gray board (one side smooth), double gray board (both sides smooth). Common weights: 800g, 1000g, 1200g, 1500g, 2000g, etc. Thickness is the key parameter.
(2) Characteristics:
Significantly increases thickness and stiffness, relatively low cost.
The back side shows the original color of the gray board (usually gray or off-white).
Prone to curling due to differences in water absorption/expansion rates between the paper and gray board, or adhesive issues (especially with changes in environmental humidity).
(3) Applications: Menus, table cards, calendar bases, certificate interiors, hardcover book cases, simple packaging boxes (e.g., inner liners/exterior mounting for mobile phone boxes, cosmetic boxes), display stand back panels, invitation covers, etc.
2. Double-Sided Gray Board Mounting
(1) Structure: Two printed pieces (face paper and back paper) + one gray board (mounting material) sandwiched in between.
(2) Materials: Face paper and back paper are the same as in single-sided mounting. Gray board is the same as above.
(3) Characteristics:
Both sides are printed or have a clean finish, offering better visual appeal and tactile feel.
Higher thickness, stiffness, and strength compared to single-sided mounting.
Higher cost (additional face paper and adhesive).
Lower curling risk compared to single-sided mounting (due to more balanced tension on both sides), but curling can still occur.
Overall thickness is significantly increased, which may affect subsequent processing (e.g., difficulty in folding).
(4) Applications: Premium business cards (thicker type), certificate covers, high-end invitations, hardcover book covers, display cards requiring double-sided presentation, high-end packaging boxes (e.g., small luxury boxes).
3. Paperboard-to-Paperboard Mounting
(1) Structure: Two or more sheets of paperboard (at least one printed) mounted directly together. No gray board is used.
(2) Materials: Commonly used are 250g, 300g, 350g, 400g coated board, matte board, white board, specialty board. Can be the same or different types of board.
(3) Characteristics:
Uniform texture throughout, all-paper feel, more "refined" compared to gray board mounting.
Thickness increase is less significant than with gray board mounting (for the same number of layers).
Lower curling risk compared to gray board mounting (due to smaller differences in expansion rates between paperboards).
Can create different effects on each side (e.g., glossy on one side, textured on the other).
Cost depends on the grade of paperboard used.
(4) Applications: Premium business cards, invitations, greeting cards, bookmarks, small-sized packaging boxes, printed materials requiring moderate stiffness without excessive thickness.
4. Printed Piece + Lightweight Coated Paper/White Board Mounting
(1) Structure: One printed piece (usually thinner or with special texture) + one lightweight coated paper or white board (serving as the base substrate).
(2) Materials:
Face Paper: Art paper, thin specialty paper, even thin fabric, etc.
Base Substrate: Lightweight coated paper (LWC), white board (e.g., 250g-400g), providing support and thickness.
(3) Characteristics:
Preserves the special surface qualities of the face paper (e.g., texture, tactile feel, translucency) while adding thickness and stiffness.
Cost depends on the face paper.
Requires careful selection of adhesive and control of coating amount to avoid penetration that could affect the face paper's appearance.
(4) Applications: High-end album covers, hardcover book covers, premium menu covers, invitations, display items emphasizing surface texture.



If you have any needs pls contact me!
Email me: 03@songhongpaper.com
